Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read Precaution thoroughly before servicing Service Precautions.

2. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
6. REMOVE STEERING PAD Removal
7. REMOVE STEERING WHEEL ASSEMBLY Removal
8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
9. REMOVE HORN BUTTON WIRE SUB-ASSEMBLY (w/o Steering Pad Switch and Cruise Control System)





(a) Disconnect the connector and remove the horn button wire sub-assembly.
10. REMOVE LOWER STEERING COLUMN COVER Removal
11. REMOVE UPPER STEERING COLUMN COVER Removal
12. REMOVE SPIRAL CABLE (w/o VSC)





(a) Disconnect the connectors from the spiral cable.
NOTE: When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable.
13. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR (w/ VSC)





(a) Disconnect the connectors from the spiral cable with steering angle sensor.
NOTE: When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable with steering angle sensor.
14. REMOVE SPIRAL CABLE (w/ VSC)





(a) Disengage the 6 claws and 2 pins, and remove the spiral cable from the steering angle sensor.