Removal

POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET: REMOVAL

REMOVAL

1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal
4. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal
6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal
7. REMOVE INSTRUMENT PANEL BOX ASSEMBLY Removal
8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
9. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY





(a) Disconnect the connector.





(b) Separate part of the No. 1 console box silencer pad to allow the wire harness to be removed.
HINT: The separated part of the No. 1 console box silencer pad will be reattached during installation.





(c) Using a screwdriver, disengage the claw and remove the center power outlet socket assembly.
10. REMOVE CENTER POWER OUTLET SOCKET COVER





(a) Disengage the 2 claws and remove the center power outlet socket cover.