Removal

E351 MANUAL TRANSMISSION / TRANSAXLE: MANUAL TRANSAXLE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT: See the steps from "Discharge Fuel System Pressure" through "Remove Engine Assembly With Transaxle" Removal.

2. INSTALL ENGINE HANGER Removal
3. REMOVE FRONT ENGINE MOUNTING INSULATOR Removal
4. REMOVE REAR ENGINE MOUNTING INSULATOR Removal
5. REMOVE STARTER ASSEMBLY Removal
6. REMOVE MANUAL TRANSAXLE ASSEMBLY





(a) Remove the 6 bolts.





(b) Remove the 4 bolts and the manual transaxle.
7. REMOVE ENGINE MOUNTING BRACKET LH





(a) Remove the 3 bolts and the engine mounting bracket LH.
8. REMOVE FRONT ENGINE MOUNTING BRACKET





(a) Remove the 3 bolts and the front engine mounting bracket.
9. REMOVE REAR ENGINE MOUNTING BRACKET





(a) Remove the 3 bolts and the rear engine mounting bracket.
10. REMOVE MANUAL TRANSMISSION CASE PROTECTOR





(a) Remove the 2 bolts and the manual transmission case protector.
11. REMOVE WIRE HARNESS CLAMP BRACKET





(a) Remove the bolt and wire harness clamp bracket.





(b) Remove the bolt and wire harness clamp bracket.