Vehicle Position Mark Is Not Updated

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Vehicle Position Mark is not Updated

Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC




(a) Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on the map disc
NG -- REPLACE MAP DISC
OK -- Continue to next step.

2. CHECK NAVIGATION DISPLAY
(a) Check if touch scrolling can be performed on the map display.
OK:
Touch scrolling can be performed.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- Continue to next step.

3. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)




(a) Enter the "Navigation Check" mode (Vehicle Sensors) Operation Check.
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.
OK:
The readings are almost equal.
NG -- PROCEED TO "SPEED SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE