Removal

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER





(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.





(b) Remove the 9 clips and 5 screws.
(c) Remove the 3 grommets and the front fender liner.
HINT: The grommets need to be replaced with new ones because they will break when they are removed.

3. REMOVE HOOD LOCK ASSEMBLY





(a) Remove the 3 bolts and the hood lock assembly.





(b) Disconnect the hood lock control cable.
4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY





(a) Disconnect the hood lock control cable and remove the hood lock control lever.
5. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disconnect the clamps as shown in the illustration.









HINT: Tape the screwdriver tip before use.

(b) Pull the cable from the engine compartment and remove it.