Operation Check

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATION CHECK

OPERATION CHECK

1. CHECK POWER DOOR LOCK CONTROL OPERATION
NOTE: The following procedure is based on the assumption that the functions have not been customized using the Techstream.

(a) Check the basic function.
(1) Check that all doors lock when the door control switch (for manual operation) is turned to LOCK and all doors unlock when turned to UNLOCK.
(2) Check that all doors lock when the driver door key cylinder is turned to LOCK using the mechanical key.
(b) Check the key lock-in prevention function.
NOTE: In order to prevent the key from being actually locked-in, the inspection should be performed with the driver door window open.
(1) Insert the key into the ignition key cylinder.
(2) With either driver or passenger door open, check that all doors unlock immediately after the door lock knob for the driver door is turned to LOCK.
(3) With either driver or passenger door open, check that all doors unlock immediately after the door control switch (for manual operation) is turned to LOCK.
(4) With either driver or passenger door open, turn the driver door lock knob to LOCK, and close the driver door. Check that all doors unlock.
(c) Check the security function.
(1) Close all doors with the driver door window open so that the door control switch can be operated from outside the vehicle.
(2) Pull out the mechanical key, open either driver or passenger door and then close and lock the door using the mechanical key. Under this condition, check that all doors do not unlock when the door control switch (for manual operation) is turned to UNLOCK from outside the vehicle.
(3) Pull out the mechanical key (transmitter), close either driver or passenger door, and lock the door using the wireless door lock operation. Under this condition, check that all doors do not unlock when the door control switch (for manual operation) is turned to UNLOCK from outside the vehicle.
HINT: Check that the security function is canceled under the following conditions:
- The ignition switch is turned to ON.
- Driver door is unlocked using the mechanical key (transmitter).
- The door control switch (for manual operation) is turned to UNLOCK after the door control knob is turned to UNLOCK manually.

(d) Check the illumination function.
(1) Set the room light switch to the DOOR position.
(2) With all doors locked, check that the driver door unlocks when the driver door key cylinder is turned to UNLOCK using the key. At the same time, the room light comes on.
(3) Check that the room light goes off in approximately 15 seconds if the doors have not been opened.
(e) Check the key-linked 2-step unlock function.
(1) Lock all doors.
(2) Check that only the driver door unlocks when the driver door key cylinder is turned to UNLOCK once using the key and other doors unlock when turned to UNLOCK consecutively once again.
(f) Check the shift linked automatic door lock function.
(1) When the ignition switch is ON and the shift lever is moved from P to any other position, check that all doors lock automatically.
(g) Check the shift linked automatic door unlock function.
(1) When the ignition switch is ON and the shift lever is moved to P from any other position, check that all doors unlock automatically.
(h) Check the driver door-linked automatic door unlock function.
(1) When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within 10 seconds will automatically unlock all the doors.
HINT: The default setting for the driver door-linked automatic door unlock function is off. If necessary, the function must be set to on using the customize function.