Reassembly

INTERIOR PANELS / TRIM: UPPER INSTRUMENT PANEL: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 1 INSTRUMENT PANEL CUSHION
(a) Remove the release paper on the No. 1 instrument panel cushion (when using a new cushion).





(b) Align the No. 1 instrument panel cushion with the scribed line and install the No. 1 instrument panel cushion.
2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for 7 Speakers)





(a) Engage the 7 claws and install the No. 1 instrument panel speaker panel sub-assembly.
3. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for 7 Speakers)





(a) Engage the 7 claws and install the No. 2 instrument panel speaker panel sub-assembly.
4. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Engage the 2 claws and install the automatic light control sensor.
5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY LH





(a) Engage the 3 claws and install the No. 1 instrument panel register assembly LH.
6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY RH





(a) Engage the 3 claws and install the No. 1 instrument panel register assembly RH.
7. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation
8. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY LH (for 7 Speakers) Installation
9. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY RH (for 7 Speakers)
HINT: Use the same procedure for the RH side and LH side.

10. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation
11. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for 4 Speakers)





(a) Engage the clamp and install the No. 2 instrument panel wire.
(b) Connect the connector.
12. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for 6 Speakers)





(a) Engage the clamp and install the No. 2 instrument panel wire.
(b) Connect the connector.
13. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for 7 Speakers)





(a) Engage the clamp and install the No. 2 instrument panel wire.
(b) Connect each connector.
14. INSTALL NO. 3 INSTRUMENT PANEL CUSHION
(a) Remove the release paper on the No. 3 instrument panel cushion (when using a new cushion).





(b) Install the No. 3 instrument panel cushion.
15. INSTALL NO. 2 INSTRUMENT PANEL CUSHION
(a) Remove the release paper on the No. 2 instrument panel cushion (when using a new cushion).





(b) Install the No. 2 instrument panel cushion.
16. INSTALL HEATER TO REGISTER DUCT ASSEMBLY





(a) Engage the 2 guides.
(b) Install the heater to register duct assembly with the 2 screws [B].
17. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Engage the 4 guides.
(b) Install the defroster nozzle assembly with the 3 screws [B].