Removal

LIGHTING (INT): ROOM LIGHT (for Center): REMOVAL

REMOVAL

1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY





(a) Using a screwdriver, disengage the 4 claws and remove the lens cover.
HINT: Tape the screwdriver tip before use.





(b) Disengage the claw and guide in the order shown in the illustration, and remove the room light cover.
HINT: Use the same procedure for the RH side and the LH side.





(c) Using a screwdriver, disengage the 2 claws [A] as shown in the illustration.
HINT: Tape the screwdriver tip before use.

(d) Disengage the 2 claws [B].





(e) Using a screwdriver, disengage the 4 claws and remove the No. 1 room light assembly.