Removal

AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: REMOVAL

REMOVAL

1. REMOVE REAR SUSPENSION MEMBER
HINT: Refer to the instructions for removal of the rear suspension member Removal.

2. REMOVE NO. 6 EXHAUST PIPE SUPPORT BRACKET Removal
3. REMOVE DIFFERENTIAL CARRIER ASSEMBLY WITH DIFFERENTIAL SUPPORT





(a) Remove the 2 rear mounting bolts.





(b) Remove the 2 bolts, 2 nuts and rear differential with differential support.
HINT: The nuts have tabs to prevent them from rotating.

4. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION
(a) Using SST, remove the rear No. 1 differential mount cushion.





SST: 09570-24011
SST: 09316-12010
NOTICE:
- Do not bring SST into contact with the sub-frame.
- Do not slant the SST bolts.
- Do not set SST in the wrong direction.
- Tighten the 2 SST bolts equally into the 2 rear No. 1 differential mount cushion holes.