Removal

EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

REMOVAL

1. REMOVE FRONT BUMPER ASSEMBLY (w/o Front Spoiler)





(a) Put protective tape around the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(b) Remove the clip.
HINT: Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
HINT: Use the same procedure for the RH side and LH side.

(d) for 2ZR-FE:




(1) Remove the 6 screws.
(2) Using a clip remover, remove the 2 clips.
(e) for 2AZ-FE:




(1) Remove the 8 screws.
(2) Using a clip remover, remove the 2 clips.





(f) Using a clip remover, remove the 3 clips.
(g) Remove the 2 radiator grille protectors.





(h) Disengage the 4 claws and guide, and disconnect the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.

(i) w/ Fog Light:
(1) Disconnect each fog light connector.
(j) Remove the front bumper assembly.
2. REMOVE FRONT BUMPER ASSEMBLY (w/ Front Spoiler)





(a) Put protective tape around the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(b) Remove the clip.
HINT: Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
HINT: Use the same procedure for the RH side and LH side.

(d) for 2ZR-FE:




(1) Remove the 6 screws.
(2) Using a clip remover, remove the 2 clips.
(e) for 2AZ-FE:




(1) Remove the 8 screws.
(2) Using a clip remover, remove the 2 clips.





(f) Using a clip remover, remove the 3 clips.
(g) Remove the 2 radiator grille protectors.





(h) Disengage the 4 claws and guide, and disconnect the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.

(i) Disconnect each fog light connector.
(j) Remove the front bumper assembly.