Reassembly

DOOR / HATCH: BACK DOOR: REASSEMBLY

REASSEMBLY

1. INSTALL REAR SPOILER ASSEMBLY (w/ Rear Spoiler) Installation
2. INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper) Installation
3. INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper) Installation
4. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper) Installation
5. INSTALL REAR WIPER ARM HEAD CAP (w/ Rear Wiper) Installation
6. INSTALL LICENSE PLATE LIGHT ASSEMBLY Installation
7. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
8. INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY





(a) Install the back door lock cylinder assembly with the 2 nuts.
9. INSTALL BACK DOOR OUTSIDE HANDLE SUB-ASSEMBLY





(a) Install the back door outside handle sub-assembly with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
10. INSTALL BACK DOOR LOCK ASSEMBLY





(a) Install the back door lock assembly with the 3 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)





(b) Connect the connector.





(c) Connect the rod as shown in the illustration.





(d) Connect the back door lock control cable sub-assembly.
11. INSTALL DOOR PULL HANDLE





(a) Engage the 4 claws and install the door pull handle.
12. INSTALL BACK DOOR TRIM BOARD ASSEMBLY





(a) Engage the 11 clips and install the back door trim board assembly.
(b) Install the 2 clips (A).
13. INSTALL BACK DOOR SIDE GARNISH LH





(a) Engage the 2 clips and 2 claws, and install the back door side garnish LH.
14. INSTALL BACK DOOR SIDE GARNISH RH





(a) Engage the 2 clips and 2 claws, and install the back door side garnish RH.
15. INSTALL CENTER STOP LIGHT SET Installation
16. INSTALL BACK DOOR CENTER GARNISH





(a) Engage the 5 clips and 4 claws, and install the back door center garnish.