Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY





(a) Connect the connector and temporarily install the combination meter assembly.
NOTE: When installing the combination meter assembly, do not damage the upper instrument panel sub-assembly and combination meter assembly.





(b) Install the combination meter assembly with the 3 screws.
2. INSTALL METER HOOD SUB-ASSEMBLY





(a) Engage the 7 claws and install the meter hood sub-assembly.





(b) Remove the applied protective tape on the steering column cover.
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation