Removal

2ZR-FE EMISSION CONTROL: CANISTER: REMOVAL

REMOVAL

1. REMOVE CHARCOAL CANISTER ASSEMBLY





(a) Disconnect the fuel tank vent hose from the charcoal canister assembly.





(b) Disconnect the vapor pressure sensor connector.
(c) Disconnect the wire harness clamp.
(d) Disconnect the purge line hose from the charcoal canister assembly.





(e) Disconnect the charcoal canister filter sub-assembly and 2 clamps from the charcoal canister assembly.





(f) Remove the 3 bolts and charcoal canister assembly.