Installation

SEAT: REAR SEAT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY RH
(a) Place the rear seatback assembly RH in the cabin.
NOTE: Be careful not to damage the vehicle body.





(b) Install the rear seatback assembly RH with the 2 bolts.
Torque: 31 Nm (316 kgf-cm, 23 ft-lbf)
2. INSTALL REAR SEATBACK INNER HINGE COVER (for RH Side)





(a) Engage the 4 claws and install the rear seatback inner hinge cover.
3. INSTALL REAR SEATBACK OUTER HINGE COVER (for RH Side)





(a) Engage the 4 claws and install the rear seatback outer hinge cover.
4. CONNECT REAR SEAT CENTER OUTER BELT ASSEMBLY Installation
5. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
6. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)
7. INSTALL REAR SEATBACK ASSEMBLY LH
(a) Place the rear seatback assembly LH in the cabin.
NOTE: Be careful not to damage the vehicle body.





(b) Install the rear seatback assembly LH with the 2 bolts.
Torque: 31 Nm (316 kgf-cm, 23 ft-lbf)
8. INSTALL REAR SEATBACK INNER HINGE COVER (for LH Side)





(a) Engage the 4 claws and install the rear seatback inner hinge cover.
9. INSTALL REAR SEATBACK OUTER HINGE COVER (for LH Side)





(a) Engage the 4 claws and install the rear seatback outer hinge cover.
10. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
11. INSTALL REAR SEAT CUSHION ASSEMBLY





(a) Attach the rear hook of the seat cushion to the seatback.
(b) Attach the 2 front hooks of the seat cushion to the vehicle body.
(c) Confirm that the seat cushion is firmly installed.
NOTE: When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.