Removal

2AZ-FE EMISSION CONTROL: CANISTER (for 2WD): REMOVAL

REMOVAL

1. REMOVE CHARCOAL CANISTER ASSEMBLY (for Torsion Beam Type Suspension)





(a) Disconnect the fuel tank vent hose from the charcoal canister.





(b) Disconnect the vapor pressure sensor connector.
(c) Disconnect the wire harness clamp.
(d) Disconnect the purge line hose.





(e) Disconnect the charcoal canister filter sub-assembly from the charcoal canister.





(f) Remove the 3 bolts and charcoal canister assembly.
2. REMOVE CHARCOAL CANISTER ASSEMBLY (for Double Wishbone Type Suspension)





(a) Disconnect the fuel tank vent hose from the charcoal canister.
(b) Disconnect the vapor pressure sensor connector.





(c) Disconnect the charcoal canister filter sub-assembly from the charcoal canister.
(d) Disconnect the purge line.





(e) Remove the 3 bolts and charcoal canister assembly.