C1300

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1300: Skid Control ECU Malfunction

DTC C1300 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self-diagnosis.






INSPECTION PROCEDURE
NOTE: When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration Initialization.

PROCEDURE

1. CHECK DTC
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(b) Turn the power switch ON (READY).
(c) Check the same DTCs are recorded Reading and Clearing Diagnostic Trouble Codes.

Result





B -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEMS TABLE
A -- REPLACE SKID CONTROL ECU