Installation

ENGINE HOOD / DOOR: HOOD: INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Install the cable.
(b) Connect the cable clamps as shown in the illustration.





(c) Install the front fender liner Installation.
(d) Remove the front bumper cover Installation.
2. INSTALL HOOD INSULATOR
(a) Install the insulator with the 6 clips.
3. INSTALL HOOD SUPPORT ROD
(a) Install the retainer and holder.
(b) Install the rod.





4. INSTALL HOOD LOCK ASSEMBLY
(a) Connect the hood lock control cable.
(b) Install the lock with the 3 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Adjust the hood lock Adjustments.