Removal

ENGINE HOOD / DOOR: HOOD: REMOVAL

REMOVAL

1. REMOVE RADIATOR SUPPORT OPENING COVER





(a) Remove the 6 clips and radiator support opening cover.
2. REMOVE HOOD LOCK ASSEMBLY





(a) Remove the 3 bolts and hood lock.
(b) Disconnect the lock control cable.
3. REMOVE HOOD SUPPORT ROD
(a) Remove the rod.
(b) Using a clip remover, remove the holder and retainer.
4. REMOVE HOOD INSULATOR
(a) Using a clip remover, remove the 6 clips and insulator.
5. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Remove the front bumper cover Removal.
(b) Remove the front fender liner Removal.
(c) Using a screwdriver, disconnect the cable clamps as shown in the illustration.
HINT: Tape the screwdriver tip before use.





(d) Remove the cable.