Removal

DOOR LOCK: TRANSMITTER BATTERY: REMOVAL

REMOVAL

1. REMOVE TRANSMITTER BATTERY
NOTE: Take extra care when handing these precision electronic components.





(a) Push and hold the release knob in the direction indicated by the arrow in the illustration. Take the emergency key out of the case.





(b) Push and hold the release knob in the direction indicated by the arrow labeled A. Push out the side cover in the direction indicated by the arrow labeled B and remove the side cover.





(c) Remove the 4 screws and cover, as shown in the illustration.





(d) Remove the transmitter's battery (lithium battery: CR1632) from the transmitter, as shown in the illustration.
NOTICE:
- Do not push the terminals with your finger.
- Do not forcibly pry up the battery. The terminals may become damaged.
- Do not touch the battery with wet hands. Water may cause rust.
- Do not touch or move any components inside the transmitter, as it may cease to work.