Registration

DOOR LOCK: SMART KEY SYSTEM: REGISTRATION

REGISTRATION

1. DESCRIPTION OF REGISTRATION: PROCEDURE 1
HINT:
- Entry codes (wireless key codes) are the same as recognition codes for the wireless transmitter. Registering an entry key code enables both the smart key system and the wireless door lock control system to be operated.
- Code registration is necessary when the certification ECU or key is replaced.

(a) Select a mode from the following:
- New registration mode:
New registration mode is used when the certification ECU is replaced with a new ECU.
- Add mode:
Add mode is used when a new key is added.
- Communication mode:
Communication mode is used to confirm the number of codes currently registered. Use the first screen of the key registration option.
- Erasure mode:
Erasure mode is used to erase all the key codes except for the code for the master key that is used during erasure mode. Use this mode when a key is lost.

(b) Perform code registration and code erasure according to the flowcharts (see PROCEDURE 2 and 3).
HINT:
- A total of 5 keys can be registered.
- When registering a transmitter, do not have any other transmitters close to the transmitter being registered. The certification ECU may be unable to recognize which transmitter is sending signals.

2. REGISTRATION OF NEW AND ADDITIONAL ENTRY KEY CODE: PROCEDURE 2
(a) Register an entry key code using the Techstream.





HINT:
- A brief outline of procedures for key code registration is shown above. For more detailed information, please refer to the Techstream screen's instructions.
- The number of currently registered codes can be checked on the first screen of the key code registration option.

3. ERASURE OF ENTRY KEY CODE: PROCEDURE 3
(a) Erase an entry key code using the Techstream.





HINT: A brief outline of procedures for key code erasure is shown above. For more detailed information, please refer to the Techstream screen's instructions.