Installation

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: INSTALLATION

INSTALLATION

1. INSTALL INSTRUMENT PANEL SAFETY PAD
(a) Attach the 6 claws and 3 clips to install the instrument panel.
(b) Install the 2 bolts.
(c) Install the 3 screws.





2. CONNECT PASSENGER AIRBAG CONNECTOR
3. INSTALL FRONT PILLAR GARNISH LH Installation
4. INSTALL FRONT PILLAR GARNISH RH Installation
5. INSTALL FRONT PILLAR GARNISH CORNER PIECE LH Installation
6. INSTALL FRONT PILLAR GARNISH CORNER PIECE RH Installation
7. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (w/ JBL Sound System)





8. INSTALL GLOVE COMPARTMENT DOOR
(a) Attach the claw and 2 clips to install the glove compartment door.
(b) Install the 2 screws.
9. INSTALL INSTRUMENT PANEL HOLE COVER
(a) Install the 2 instrument panel hole covers.
10. INSTALL INSTRUMENT CLUSTER FINISH PANEL END
11. INSTALL INSTRUMENT PANEL CUSHION
12. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
(a) Attach the 2 hinges to install the door.





(b) While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, engage it to the 2 stoppers.
13. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
14. INSTALL MULTI-DISPLAY ASSEMBLY





15. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Attach the 2 claws and 4 clips to install the instrument panel register.





16. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Attach the 6 clips to install the instrument panel register.





17. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Connect the connector.
(b) Attach the claw and 5 clips to install the instrument panel register.





18. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
(a) Connect the connector.
(b) Attach the 3 claws and 4 clips to install the instrument panel finish panel.





19. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
(a) Connect the connectors.
(b) Attach the 4 claws and 5 clips to install the instrument panel finish panel.
(c) Connect the hood lock control cable.
(d) Install the 2 screws.





20. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Attach the 2 claws and 4 clips to install the instrument panel register.
21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
22. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

23. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.