How To Proceed With Troubleshooting

METER: METER / GAUGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
- Use these procedures to troubleshoot the meter / gauge system.
- *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.

3. PROBLEM SYMPTOMS TABLE

Result





B -- Go to step 5
A -- Continue to next step.

4. OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Terminals of ECU Meter / Gauge System
(b) Data List / Active Test Meter / Gauge System
(c) On-vehicle Inspection Component Tests and General Diagnostics
NEXT -- Continue to next step.

5. REPAIR OR REPLACE
NEXT -- Continue to next step.

6. CONFIRMATION TEST
NEXT -- END