Removal

1NZ-FXE IGNITION: IGNITION COIL: REMOVAL

REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD Removal
2. REMOVE REAR DECK FLOOR BOX Removal
3. REMOVE REAR NO. 3 FLOOR BOARD Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

5. DISCONNECT ENGINE ROOM NO. 2 RELAY BLOCK





(a) Remove the 2 bolts and disconnect the relay block.
6. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 4 ignition coil connectors.





(b) Remove the 4 bolts and pull out the 4 ignition coils.