Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL

REMOVAL
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE NO. 2 STEERING WHEEL COVER LOWER
4. REMOVE NO. 3 STEERING WHEEL COVER LOWER
5. REMOVE STEERING PAD ASSEMBLY Removal
6. REMOVE STEERING WHEEL ASSEMBLY Removal
7. REMOVE STEERING COLUMN COVER Removal





8. REMOVE SPIRAL CABLE SUB-ASSEMBLY
(a) Disconnect the airbag connector.
NOTE: When handling the airbag connector, do not damage the airbag wire harness.

(b) Detach the 3 claws and remove the spiral cable.