Disposal

SUSPENSION: FRONT SHOCK ABSORBER WITH COIL SPRING: DISPOSAL

DISPOSAL
HINT: Dispose of the RH side following the same procedures as the LH side.

1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH





(a) Fully extend the shock absorber rod.
(b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
CAUTION: Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.
NOTE: The gas is colorless, odorless and non-poisonous.