Installation

HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION

INSTALLATION

1. INSTALL SHIFT LEVER ASSEMBLY





(a) Connect the 2 connectors to the shift lever.
(b) Install the shift lever with the 3 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
2. INSPECT SHIFT LEVER ASSEMBLY
(a) Inspect the shift lever Hybrid Transaxle System.
3. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
4. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
(a) Connect the cable to the negative (-) battery terminal Installation.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.