Removal

WIPER AND WASHER: REAR WIPER MOTOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR WIPER ARM COVER
3. REMOVE REAR WIPER ARM ASSEMBLY
(a) Remove the nut and rear wiper arm.
4. REMOVE BACK DOOR LOWER TRIM BOARD ASSEMBLY Disassembly
5. REMOVE REAR WIPER MOTOR ASSEMBLY





(a) Disconnect the connector.
(b) Remove the 3 bolts and rear wiper motor.