CD Sound Skips

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: CD Sound Skips

CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD




(a) Check that the CD is not deformed or cracked.
OK:
No deformation or cracks on the CD.

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK CD




(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTICE: Do not use a conventional record cleaner or anti-static preservative.

NG -- CLEAN CD
OK -- Continue to next step.

3. CHECK OPERATION OF ANOTHER CD
(a) Check using another CD.
(1) Check if the problem recurs using another CD.
OK:
The problem does not occur.

NG -- CHECK NAVIGATION RECEIVER ASSEMBLY
OK -- CD WAS FAULTY
4. CHECK NAVIGATION RECEIVER ASSEMBLY
(a) Check the navigation receiver assembly installation condition.
(1) Check that the navigation receiver assembly is properly installed.
OK:
The navigation receiver assembly is properly installed.

NG -- REINSTALL NAVIGATION RECEIVER ASSEMBLY
OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY