Installation

MIRROR (EXT): OUTER REAR VIEW MIRROR: INSTALLATION

INSTALLATION

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY





(a) Engage the claw to install the outer rear view mirror assembly.





(b) Install the 3 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
(c) Connect the connector.





(d) Install the hole plug.
2. INSTALL FRONT DOOR SERVICE HOLE COVER Reassembly
3. INSTALL DOOR SIDE AIRBAG SENSOR Removal
4. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY Reassembly
5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly
6. INSTALL COURTESY LIGHT ASSEMBLY Installation
7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Reassembly
8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Installation
9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.