Removal

EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL





(a) Using a clip remover, remove the 12 clips and cool air intake duct seal.
2. REMOVE RADIATOR GRILLE PROTECTOR Removal
3. REMOVE RADIATOR GRILLE Removal
4. REMOVE FRONT BUMPER ASSEMBLY





(a) Put protective tape around the front bumper assembly.

Text in Illustration









(b) Remove the 2 bolts and 6 screws.
(c) Using a clip remover, remove the clip.





(d) Remove the screw.
HINT: Use the same procedure for the RH side and LH side.





(e) Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.
HINT: Use the same procedure for the RH side and LH side.





(f) Disengage the 4 claws and remove the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.

(g) Disconnect the fog light connector. (w/ Fog Light)





(h) Remove the front bumper assembly as shown in the illustration.