Installation

SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): INSTALLATION

INSTALLATION

1. INSTALL FRONT SEAT ASSEMBLY
(a) Place the front seat assembly in the cabin.
NOTICE: Be careful not to damage the vehicle body.

(b) Connect the connectors under the seat.
(c) Temporarily install the front seat assembly with the 4 bolts.
(d) Lift up the seat track adjusting handle and move the seat to the rearmost position.





(e) Tighten the 2 bolts on the front side of the seat.
Torque: 37 Nm (377 kgf-cm, 27ft-lbf)
HINT: Tighten the bolts in the order indicated in the illustration.

(f) Lift up the seat track adjusting handle and move the seat to the foremost position.





(g) Tighten the 2 bolts on the rear side of the seat.
Torque: 37 Nm (377 kgf-cm, 27ft-lbf)
HINT: Tighten the bolts in the order indicated in the illustration.

2. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK
(a) During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously.
If the seat adjusters do not lock simultaneously, loosen the bolts securing the seat to adjust the adjuster position.
3. INSTALL FRONT SEAT REAR INNER TRACK COVER





(a) Engage the 2 claws and install the front seat rear inner track cover.
4. INSTALL FRONT SEAT REAR OUTER TRACK COVER





(a) Engage the 2 claws and install the front seat rear outer track cover.
5. INSTALL FRONT SEAT HEADREST ASSEMBLY





(a) Install the front seat headrest assembly as shown in the illustration.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSPECT SRS WARNING LIGHT Diagnosis System