Installation

AUDIO / VIDEO: RADIO ANTENNA CORD: INSTALLATION

INSTALLATION

1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY
(a) Pass the rear No. 2 washer hose through the No. 3 antenna cord sub-assembly.





(b) Pass the No. 3 antenna cord sub-assembly with No. 2 washer hose through the vehicle body as shown in the illustration.
(c) Engage the 2 claws.
(d) Connect the grommet to the back door.
(e) Engage the 4 clamps.





Text in Illustration









(f) Connect the connector to the radio antenna amplifier.
(g) w/o Satellite Radio:
(1) Engage the 7 clamps.
(2) Engage the 4 hooks to connect the rear No. 2 washer hose.





Text in Illustration








(3) Connect the 2 connectors.
(h) w/ Satellite Radio:
(1) Engage the 8 clamps.
(2) Engage the 4 hooks to connect the rear No. 2 washer hose.





Text in Illustration








(3) Connect the 3 connectors.





(i) Set the position of the grommet as shown in the illustration.

Text in Illustration





HINT: Flat area to be oriented outside the vehicle.

2. INSTALL SATELLITE RADIO ANTENNA CORD (for Satellite Radio)





(a) Engage the 6 clamps to install the satellite radio antenna cord.
(b) Connect the 2 connectors.
3. CONNECT REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY (for Satellite Radio)





(a) Install the rear seat lock control lever sub-assembly with the screw.
4. INSTALL BACK DOOR TRIM COVER RH Reassembly
5. INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door) Reassembly
6. INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door) Reassembly
7. INSTALL BACK DOOR PANEL TRIM ASSEMBLY Reassembly
8. INSTALL UPPER BACK WINDOW PANEL TRIM Reassembly
9. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof)
(a) Aligning the No. 2 antenna cord sub-assembly and rear No. 2 washer hose with the markings on the roof headlining assembly, temporarily install the cord and washer hose.





(b) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord and washer hose to the roof headlining assembly.
HINT:
- If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cord and washer hose to the roof headlining assembly.
- Secure the antenna cord and washer hose to the roof headlining assembly with tape as shown in the illustration.

10. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof)
(a) Aligning the No. 2 antenna cord sub-assembly and rear No. 2 washer hose with the markings on the roof headlining assembly, temporarily install the cord and washer hose.





(b) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord and washer hose to the roof headlining assembly.
HINT:
- If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cord and washer hose to the roof headlining assembly.
- Secure the antenna cord and washer hose to the roof headlining assembly with tape as shown in the illustration.

11. INSTALL ROOF HEADLINING ASSEMBLY
HINT: Refer to the procedure from Install Roof Headlining Assembly Installation.

12. INSTALL NO. 1 ANTENNA CORD SUB-ASSEMBLY
(a) Engage the 7 clamps to install the No. 1 antenna cord sub-assembly.





13. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
HINT: Refer to the procedure from Install Instrument Panel Safety Pad Assembly Installation.