Removal

AUDIO / VIDEO: RADIO ANTENNA CORD: REMOVAL

REMOVAL

1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
HINT: Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly Removal.

2. REMOVE NO. 1 ANTENNA CORD SUB-ASSEMBLY
(a) Disengage the 7 clamps and remove the No. 1 antenna cord sub-assembly.





3. REMOVE ROOF HEADLINING ASSEMBLY
HINT: Refer to the procedure up to Remove Roof Headlining Assembly Removal.

4. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof)
(a) Peel up the strips of tape so that the rear No. 2 washer hose and No. 2 antenna cord sub-assembly can be removed.




HINT: Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

(b) Remove the rear No. 2 washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly.
5. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof)
(a) Peel up the strips of tape so that the rear No. 2 washer hose and No. 2 antenna cord sub-assembly can be removed.




HINT: Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

(b) Remove the rear No. 2 washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly.
6. REMOVE UPPER BACK WINDOW PANEL TRIM Disassembly
7. REMOVE BACK DOOR PANEL TRIM ASSEMBLY Disassembly
8. REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door) Disassembly
9. REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door) Disassembly
10. REMOVE BACK DOOR TRIM COVER RH Disassembly
11. DISCONNECT REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY (for Satellite Radio)





(a) Remove the screw and disconnect the rear seat lock control lever sub-assembly.
12. REMOVE SATELLITE RADIO ANTENNA CORD (for Satellite Radio)





(a) Disconnect the 2 connectors.
(b) Disengage the 6 clamps and remove the satellite radio antenna cord.
13. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY
(a) w/o Satellite Radio:




(1) Disconnect the 2 connectors.
(2) Disengage the 4 hooks and disconnect the washer hose.
(3) Disengage the 7 clamps.





Text in Illustration





(b) w/ Satellite Radio:




(1) Disconnect the 3 connectors.
(2) Disengage the 4 hooks and disconnect the washer hose.
(3) Disengage the 8 clamps.





Text in Illustration









(c) Disconnect the connector from the radio antenna amplifier.
(d) Disengage the 4 clamps.
(e) Disconnect the grommet from the back door.
(f) Disengage the 2 claws.





Text in Illustration









(g) Remove the No. 3 antenna cord sub-assembly with the washer hose as shown in the illustration.
(h) Remove the washer hose.