Vehicle Position Mark Deviates Greatly

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Vehicle Position Mark Deviates Greatly

Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

PROCEDURE

1. CHECK GPS MARK




(a) Check that the GPS mark is displayed.
OK:
GPS mark is displayed.

NG -- GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE
OK -- Continue to next step.

2. CHECK VEHICLE SENSOR (OPERATION CHECK)




(a) Enter the "Vehicle Sensors" (Check GPS & Vehicle Sensors) Operation Check.
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.
OK:
The readings are almost equal.

NG -- CHECK DTC OUTPUT
OK -- Continue to next step.

3. CHECK VEHICLE SIGNAL (OPERATION CHECK)
(a) Enter the "Vehicle Signal Check Mode" (Check Vehicle Signal) Operation Check.




(b) Check that the display changes between ON and OFF according to the shift lever operation.
OK:





HINT: The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

NG -- GO TO "REVERSE SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE