Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY

(a) Engage the 6 claws and install the rear bumper assembly as shown in the illustration.

(b) Engage the 5 claws.
HINT: Use the same procedure for the RH side and LH side.

(d) Engage the 2 clips and install the 2 screws.

(e) Install the 2 bolts and 2 screws.
Bolt - Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
(f) Engage the 2 clips.
2. INSTALL REAR BUMPER PLATE LH

(a) Engage the 2 claws and install the rear bumper plate LH.
3. INSTALL REAR BUMPER PLATE RH
HINT: Use the same procedure for the RH side and LH side.