Removal

1AR-FE INTAKE / EXHAUST: EXHAUST PIPE: REMOVAL

REMOVAL
CAUTION:
- Wear protective gloves when removing the exhaust pipe.
- The exhaust pipe is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe has cooled down before removing it.

1. REMOVE HEATED OXYGEN SENSOR
(a) Remove the heated oxygen sensor Removal.
2. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY





(a) Using a plastic hammer, uniformly tap off the tail exhaust pipe baffle sub-assembly.
3. REMOVE TAIL EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the tail exhaust pipe assembly from the 4 exhaust pipe supports.
(c) Remove the gasket from the center exhaust pipe assembly.
4. REMOVE CENTER EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts.
(b) Remove the center exhaust pipe assembly from the 2 exhaust pipe supports.
(c) Remove the gasket from the center exhaust pipe assembly.
5. REMOVE FRONT EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.
(b) Remove the gasket from the exhaust manifold converter sub-assembly.