Removal

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL LH
2. REMOVE FRONT FENDER OUTSIDE MOULDING LH Removal
3. REMOVE FRONT FENDER LINER LH





(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.





(b) Remove the 4 clips.
(c) Remove the bolt and 8 screws.
(d) Remove the 3 grommets and front fender liner LH.
HINT: The grommets need to be replaced with new ones because they will break when they are removed.

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal
5. REMOVE RADIATOR GRILLE PROTECTOR Removal
6. REMOVE RADIATOR GRILLE Removal
7. REMOVE HIGH PITCHED HORN ASSEMBLY Removal
8. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)





(a) Using a screwdriver, remove the hood lock nut cap.

Text in Illustration





HINT: Tape the screwdriver tip before use.





(b) Remove the 3 bolts.





(c) Disconnect the hood lock control cable and remove the hood lock assembly.
9. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)





(a) Using a screwdriver, remove the hood lock nut cap.

Text in Illustration





HINT: Tape the screwdriver tip before use.





(b) Disconnect the connector.
(c) Remove the 3 bolts.





(d) Disconnect the hood lock control cable and remove the hood lock assembly.
10. REMOVE FRONT DOOR SCUFF PLATE LH Removal
11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
12. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal
13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disconnect the clamps shown in the illustration.





Text in Illustration





HINT: Tape the screwdriver tip before use.

(b) Pull the hood lock control cable assembly from the engine compartment and remove it.