Installation

AUDIO / VISUAL: REAR PACKAGE TRAY SPEAKER: INSTALLATION

INSTALLATION
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

1. INSTALL REAR SPEAKER ASSEMBLY





(a) Install the rear speaker with the 4 bolts.
(b) Connect the speaker connector.
2. INSTALL PACKAGE TRAY TRIM PAD





(a) Install the package tray trim pad.
3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY





(a) Engage the 5 claws and install the package tray trim.
(b) Install the 4 clips.
4. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY (w/o Rear Spoiler) Installation
5. INSTALL ROOF SIDE INNER GARNISH RH Installation
6. INSTALL ROOF SIDE INNER GARNISH LH Installation
7. INSTALL REAR SEAT SIDE COVER RH Installation
8. INSTALL REAR SEAT SIDE COVER LH Installation





9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
(a) Install the rear door opening trim weatherstrip.
10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side.

11. INSTALL REAR DOOR SCUFF PLATE RH Installation
12. INSTALL REAR DOOR SCUFF PLATE LH Installation
13. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) Installation
14. INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type) Installation
15. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) Installation
16. INSTALL REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type) Installation
17. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type) Installation
18. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) Installation
19. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
(a) for 60/40 Split Seat Type:
(1) Install the rear seat cushion cover pad sub-assembly Installation.
(b) for Fixed Seat Type:
(1) Install the rear seat cushion cover pad sub-assembly Installation.
20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)