Removal

AUDIO / VISUAL: REAR PACKAGE TRAY SPEAKER: REMOVAL

REMOVAL
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
(a) for 60/40 Split Seat Type:
(1) Remove the rear seat cushion cover pad sub-assembly Removal.
(b) for Fixed Seat Type:
(1) Remove the rear seat cushion cover pad sub-assembly Removal.
3. REMOVE REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type) Removal
4. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type) Removal
5. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type) Removal
6. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) Disassembly
7. REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type) Disassembly
8. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) Disassembly
9. REMOVE REAR DOOR SCUFF PLATE RH Removal
10. REMOVE REAR DOOR SCUFF PLATE LH Removal





11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
(a) Remove the rear door opening trim weatherstrip to the extent that the rear seat side cover and the roof side inner garnish.
12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side.

13. REMOVE REAR SEAT SIDE COVER RH Removal
14. REMOVE REAR SEAT SIDE COVER LH Removal
15. REMOVE ROOF SIDE INNER GARNISH RH Removal
16. REMOVE ROOF SIDE INNER GARNISH LH Removal
17. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY (w/o Rear Spoiler) Removal
18. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY





(a) Using a clip remover, remove the 4 clips.
(b) Disengage the 5 claws and remove the package tray trim panel.
19. REMOVE PACKAGE TRAY TRIM PAD





(a) Remove the pack age tray trim pad.
20. REMOVE REAR SPEAKER ASSEMBLY





(a) Disconnect the speaker connector.
(b) Remove the 4 bolts and the rear speaker.