Pinout Values and Diagnostic Parameters

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK RADIO RECEIVER





(a) Disconnect the D10 radio receiver connector.
(b) Measure the resistance and voltage of the wire harness side connector.





HINT: If the results are not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the D10 receiver connector.
(d) Measure the voltage and resistance of the connector.





*1: for Hatchback
*2: for Sedan
HINT: If the results are not as specified, there may be a malfunction in the wire harness.