ABS Warning Light does not Come ON

BRAKE CONTROL: ANTI-LOCK BRAKE SYSTEM (for Sedan): ABS Warning Light does not Come ON

ABS Warning Light does not Come ON

WIRING DIAGRAM

ABS Warning Light Remains ON.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM
(a) Check if the CAN communication system DTC is output Diagnosis System.
Result:






B -- REPAIR CAN COMMUNICATION SYSTEM
A -- Continue to next step.
2. PERFORM ACTIVE TEST USING TECHSTREAM (ABS WARNING LIGHT)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester on.
(d) Select the following menu items: Body / Combination Meter / Active Test.

ACTIVE TEST: Combination Meter





(e) Check that the ABS warning light turns on and off in the combination meter using the Techstream.
OK:
The ABS warning light turns ON and OFF in accordance with the Techstream operation.
B -- CHECK COMBINATION METER CIRCUIT
A -- REPLACE BRAKE ACTUATOR