Installation

METER: COMBINATION METER (for Hatchback): INSTALLATION

INSTALLATION





1. INSTALL COMBINATION METER ASSEMBLY
(a) Install the combination meter assembly with the 2 screws.
(b) Connect the 2 connectors.
2. INSTALL INSTRUMENT CLUSTER FINISH NO.1 PANEL





(a) Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.





(b) Engage the 4 claws and 5 clips and install the instrument cluster finish panel.
3. INSTALL INSTRUMENT PANEL FINISH PANEL END RH





(a) Connect the connector.
(b) Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH





(a) Connect the connector.
(b) Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)