Removal

1NZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE CYLINDER HEAD COVER NO. 2 Removal
4. REMOVE FAN AND GENERATOR V BELT Removal





5. REMOVE FAN BELT ADJUSTING BAR
(a) Remove the bolt and nut and remove the fan belt adjusting bar.
6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY





(a) Disconnect the camshaft timing oil control valve assembly connector.





(b) Remove the bolt and nut and remove the camshaft timing oil control valve assembly.





(c) Remove the O-ring from the camshaft timing oil control valve assembly.