Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY (for Hatchback): INSTALLATION

INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.





1. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY
(a) Connect the airbag connector to install the instrument panel wire.
NOTICE:
- Match the color of the connector of the instrument panel wire assembly with that of the connector of the front passenger assembly and install the airbag connector.
- Lock the locking button securely.





2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(a) Engage the 10 hooks so that the connector side faces the outside of the vehicle, and install the instrument panel passenger airbag.
(b) Install the wire harness onto the 2 claws of the instrument panel.
3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation
4. INSTALL FRONT PILLAR GARNISH RH Installation
5. INSTALL FRONT PILLAR GARNISH LH Installation
6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation
7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
8. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
9. INSTALL NO. 1 SWITCH HOLE BASE Installation
10. INSTALL COMBINATION METER ASSEMBLY Installation
11. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation
12. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
13. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
15. INSPECT SRS WARNING LIGHT
Diagnosis System