Removal

C50 MANUAL TRANSAXLE: TRANSMISSION CONTROL CABLE: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Hatchback) Removal
3. REMOVE CONSOLE BOX ASSEMBLY REAR (for Hatchback) Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for Sedan) Removal
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan) Removal
6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) Removal
7. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Sedan) Removal
8. REMOVE CONSOLE BOX CARPET (for Sedan) Removal
9. REMOVE REAR CONSOLE BOX ASSEMBLY (for Sedan) Removal
10. DISCONNECT OXYGEN SENSOR CONNECTOR
11. REMOVE EXHAUST PIPE ASSEMBLY FRONT Removal
12. REMOVE FRONT FLOOR HEAT INSULATOR NO.1
(a) Remove the 2 bolts and nut and remove floor heat insulator No.1.
13. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Disconnect the control shift cable from the shift lever.
(b) Turn the lock to release it and separate the control shift cable from the shift lever retainer.
(c) Remove the clip and disconnect the control select cable from the shift lever.
(d) Turn the lock to release it and separate the control select cable from the shift lever retainer.





(e) Remove the 2 clips and the 2 washers, and disconnect the 2 cables from the transaxle.
(f) Remove the 2 clips and disconnect the 2 cables from the control cable bracket.





(g) Remove the 3 nuts and remove the transmission control cable.