Front Passenger Side Power Window Does Not Operate With Front Passenger Side Power Window Switch

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch

Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch

DESCRIPTION

If the passenger side manual UP / DOWN function does not operate, a malfunction may exist in the power window regulator motor, power window regulator switch, power window regulator master switch or wire harness.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE) (POWER SOURCE)




(a) Disconnect the F1 power window regulator switch assembly connector.
(b) Measure the voltage of the wire harness side connector.
Standard voltage:





(c) Reconnect the F1 power window regulator switch assembly connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE)




(a) Remove the power window regulator switch assembly.
(b) Measure the resistance of the switch when the switch is operated.
Standard resistance:





(c) Reinstall the power window regulator switch assembly.
NG -- REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE)
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (SWITCH (PASSENGER SIDE) - MOTOR (PASSENGER SIDE))
(a) Disconnect the F1 power window regulator switch assembly connector.




(b) Disconnect the F4 power window regulator motor assembly connector.
(c) Measure the resistance of the wire harness side connectors.
Standard resistance:





(d) Reconnect the F1 power window regulator switch assembly connector.
(e) Reconnect the F4 power window regulator motor assembly connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (PASSENGER SIDE)




(a) Remove the power window regulator motor assembly.
(b) Apply battery voltage to connector terminals 1 and 2.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.
(c) Check that the motor gear rotates smoothly as follows.
OK:





(d) Reinstall the power window regulator motor assembly.
NG -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (PASSENGER SIDE)
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (MASTER SWITCH - SWITCH (PASSENGER SIDE))
(a) Disconnect the G1 power window regulator master switch assembly connector.




(b) Disconnect the F1 power window regulator switch assembly connector.
(c) Measure the resistance of the wire harness side connectors.
Standard resistance:
3 Door






Except 3 door





(d) Reconnect the G1 power window regulator master switch assembly connector.
(e) Reconnect the F1 power window regulator switch assembly connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (FRONT PASSENGER SWITCH)




(a) 3 Door:
Inspect the front passenger switch.
(1) Remove the power window regulator master switch.
(2) Measure the resistance of the switch when the switch is operated.
Standard resistance:






(3) Reinstall the power window master switch.




(b) Except 3 door:
Inspect the front passenger switch.
(1) Remove the power window regulator master switch.
(2) Measure the resistance of the switch when the switch is operated.
Standard resistance:






(3) Reinstall the power window regulator master switch.
NG -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
OK -- GO TO POWER WINDOWS DO NOT OPERATE AT ALL