Installation

AUDIO / VIDEO: RADIO ANTENNA CORD: INSTALLATION

1. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof)

(a) Install the antenna cord to the roof headlining assembly from the front of the vehicle.

(b) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord to the roof headlining assembly.

HINT
* If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cord to the roof headlining assembly.
* For the right corner of the roof headlining assembly, position the marking tape on the antenna cord within the area indicated by the marking line. Secure the antenna cord to the roof headlining assembly with tape as shown in the illustration.
* If the entire length of the antenna cord does not fit, adjust the length by tucking in the cord at the area shown in the illustration.
3. INSTALL ROOF HEADLINING ASSEMBLY (w/o Sliding Roof) Installation

4. INSTALL ROOF HEADLINING ASSEMBLY (w/ Sliding Roof) Installation

5. INSTALL VISOR HOLDER Installation

6. INSTALL REAR ASSIST GRIP ASSEMBLY Installation

7. INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY (w/o Curtain Shield Airbag) Installation

8. INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY (w/ Curtain Shield Airbag) Installation

9. INSTALL VISOR ASSEMBLY LH Installation

10. INSTALL VISOR ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

11. INSTALL SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof) Installation

12. INSTALL NO. 2 ROOM LIGHT ASSEMBLY Installation

13. INSTALL NO. 1 ROOM LIGHT ASSEMBLY Installation

14. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof) Installation

15. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof) Installation

16. INSTALL INNER REAR VIEW MIRROR COVER (w/ EC Mirror) Installation

17. INSTALL ROOF SIDE INNER GARNISH LH Installation

18. INSTALL QUARTER PILLAR GARNISH LH Installation

19. INSTALL SIDE DECK TRIM PANEL ASSEMBLY LH Installation

20. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation

21. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) Installation

22. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) Installation

23. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation

24. INSTALL REAR SEAT SIDE GARNISH LH Installation

25. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side) Installation

26. INSTALL ROOF SIDE INNER GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

27. INSTALL QUARTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

28. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH (w/o Woofer) Installation

29. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH (w/ Woofer) Installation

30. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH (w/ Woofer) Installation

31. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)

HINT
Use the same procedure for the RH side and the LH side.

32. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

HINT
Use the same procedure for the RH side and the LH side.

33. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation

34. INSTALL REAR SEAT SIDE GARNISH RH Installation

35. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

HINT
Use the same procedure for the RH side and the LH side.

36. INSTALL REAR DECK TRIM COVER Installation

37. INSTALL LUGGAGE COMPARTMENT TRAY Installation

38. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR Installation

39. INSTALL DECK FLOOR BOX RH Installation

40. INSTALL DECK FLOOR BOX LH Installation

41. INSTALL JACK ASSEMBLY Installation

42. INSTALL JACK CARRIER ASSEMBLY

43. INSTALL NO. 2 DECK BOARD Installation

44. INSTALL DECK BOARD ASSEMBLY Installation

45. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

46. INSTALL REAR SEATBACK ASSEMBLY RH Installation

47. INSTALL REAR SEATBACK INNER HINGE COVER (for RH Side) Installation

48. INSTALL REAR SEATBACK OUTER HINGE COVER (for RH Side) Installation

49. CONNECT REAR SEAT CENTER OUTER BELT ASSEMBLY Installation

50. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

51. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

52. INSTALL REAR SEATBACK ASSEMBLY LH Installation

53. INSTALL REAR SEATBACK INNER HINGE COVER (for LH Side) Installation

54. INSTALL REAR SEATBACK OUTER HINGE COVER (for LH Side) Installation

55. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

56. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

57. INSTALL UPPER CENTER PILLAR GARNISH LH Installation

58. INSTALL LOWER CENTER PILLAR GARNISH LH Installation

59. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH Installation

60. INSTALL LAP BELT OUTER ANCHOR COVER (for Driver Side) Installation

61. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation

62. INSTALL REAR DOOR SCUFF PLATE LH Installation

63. INSTALL UPPER CENTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

64. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH Installation

65. INSTALL LOWER CENTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

66. INSTALL LAP BELT OUTER ANCHOR COVER (for Front Passenger Side) Installation

67. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation

68. INSTALL REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side.

69. INSTALL RADIO WIRE SUB-ASSEMBLY

(a) Connect the connector and install the radio wire sub-assembly with the bolt.

(b) Engage the 6 clamps.

(c) Engage the claw and install the radio wire connector.

(d) Connect the connector.

70. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation

71. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation

72. INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Installation

73. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

74. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation

75. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation

76. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

77. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

78. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

79. INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Installation

80. INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Installation

81. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

82. INSTALL COWL SIDE TRIM BOARD LH Installation

83. INSTALL FRONT DOOR SCUFF PLATE LH Installation

84. INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

HINT
Use the same procedure for the RH side and the LH side.

85. INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag) Installation

86. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

87. INSTALL COWL SIDE TRIM BOARD RH

HINT
Use the same procedure for the RH side and the LH side.

88. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side.

89. INSTALL COMBINATION METER ASSEMBLY Installation

90. INSTALL METER HOOD SUB-ASSEMBLY Installation

91. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

92. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

93. ADJUST SPIRAL CABLE Installation

94. INSTALL STEERING WHEEL ASSEMBLY Installation

95. INSTALL STEERING PAD Installation

96. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

97. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

98. INSPECT STEERING WHEEL CENTER POINT

99. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

100. INSPECT STEERING PAD Installation

101. INSPECT SRS WARNING LIGHT

Diagnosis System