Installation

AUDIO / VIDEO: RADIO ANTENNA CORD: INSTALLATION

1. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof)

(a) Install the antenna cord to the roof headlining assembly from the front of the vehicle.





Text in Illustration





(b) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord to the roof headlining assembly.

HINT
* If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cord to the roof headlining assembly.
* For the right corner of the roof headlining assembly, position the marking tape on the antenna cord within the area indicated by the marking line. Secure the antenna cord to the roof headlining assembly with tape as shown in the illustration.
* If the entire length of the antenna cord does not fit, adjust the length by tucking in the cord at the area shown in the illustration.

2. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof)

(a) Engage the 3 clamps and install the antenna cord to the roof headlining assembly from the front of the vehicle.





Text in Illustration





(b) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord to the roof headlining assembly.

HINT
* If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cord to the roof headlining assembly.
* For the right corner of the roof headlining assembly, position the marking tape on the antenna cord within the area indicated by the marking line. Secure the antenna cord to the roof headlining assembly with tape as shown in the illustration.
* If the entire length of the antenna cord does not fit, adjust the length by tucking in the cord at the area shown in the illustration.

3. INSTALL ROOF HEADLINING ASSEMBLY

Installation

4. INSTALL RADIO WIRE SUB-ASSEMBLY

(a) Connect the connector and install the radio wire sub-assembly with the bolt.





(b) Engage the 6 clamps.

(c) Engage the claw and install the radio wire connector.





(d) Connect the connector.

5. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Installation