Removal

2ZR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE ENGINE UNDER COVER RH

3. REMOVE NO. 2 CYLINDER HEAD COVER Removal

4. REMOVE V-RIBBED BELT Removal

5. REMOVE CRANKSHAFT PULLEY

(a) Using SST, hold the pulley in place and loosen the pulley bolt.





SST : 09213-58014

91551-80840

SST : 09330-00021

NOTICE:
Check the SST installation positions when installing them to prevent the SST fixing bolts from coming into contact with the timing chain cover sub-assembly.

(b) Using SST, remove the crankshaft pulley and pulley bolt.





SST : 09950-50013

09951-05010

09952-05010

09953-05020

09954-05021

6. REMOVE TIMING CHAIN COVER OIL SEAL

(a) Using a knife, cut off the lip of the oil seal.





(b) Using a screwdriver with its tip wrapped with tape, pry out the oil seal.

NOTICE:
After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.