Reverse Gear Shaft

Reverse Gear Shaft

Special tools, testers and auxiliary items required

• Thrust tube (VW 454)

• Thrust pad (VW 447 H)

• Punch (VW 411)

• Centering mandrel (12 - 551)

• Thrust plate (VW 401)

• Punch (VW 408 A)

• Punch (VW 407)

• Internal extractor (Kukko 21/2)

• Counter-support (Kukko 22/1 )

Pulling needle bearing out of clutch housing





A Support, e.g. ( Kukko 22/1)
B Internal puller 14.5 to 18.5 mm, e.g. (Kukko 21/2)

• Needle sleeve is destroyed when removed and must be replaced.

Pressing needle sleeve - A - into clutch housing





Pressing needle bearing out of reverse gear shaft support





Pressing needle bearing in reverse gear shaft support